Hisense 40D50P User Manual

10 English
Installing Batteries in the Remote Control
NOTES
Product image is only for reference, actual product may vary in appearance.
Dispose of your batteries in a designated disposal area. Do not throw the batteries
into a fire.
Do not mix battery types or combine used batteries with new ones.
Remove depleted batteries immediately to prevent battery acid from leaking into
the battery compartment.
If you do not intend to use the remote control for a long time, remove the batteries.
Batteries should not be exposed to excessive heat, such as sunshine, heat
registers, or fire.
Battery chemicals can cause a rash. If the batteries leak, clean the battery
compartment with a cloth. If chemicals touch your skin, wash immediately.
Remote Control Operation Range
1. Point the remote control
at the TV within no more
than 5 metres from the
remote control sensor on
the TV and within 60° in
front of the TV.
2. The operating distance
may vary depending on
the brightness of the
room.
Remote Control
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the
batteries with the (+) and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
1
Gently push and slide
2
Insert the batteries
3
Gently push and slide

Hisense 40D50P Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	40 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Direct-LED
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Screen format adjustments	4:3, Auto, Zoom
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1920 x 1080 (HD 1080)
Motion interpolation technology	-
3D	No
Battery type	AAA
Supported file systems	FAT, FAT32, NTFS, exFAT
Logical Channel Number (LCN)	Yes
Number of batteries supported	2
Operating relative humidity (H-H)	20 - 80 %
HDMI version	1.4
RF ports quantity	1
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity	0
Tuner type	Analog & digital
Analog signal format system	PAL, PAL B, PAL BG, PAL DK, SECAM, SECAM B/G, SECAM D/K
Digital signal format system	DVB-T
Audio formats supported	AAC, AC3, MP3
Video formats supported	ASF, AVI, FLV, H.264, H.264 BP, MKV, MP4, MPEG, MPEG1, MPEG2, MPEG4, MPEG4-ASP, MPEG4-SP, MPG, PS, TS, VOB
Product color	Black
Panel mounting interface	200 x 200 mm
Programming period	7 day(s)
Audio decoders	Dolby Digital, Dolby Digital AC3
RMS rated power	14 W
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	1 W
Remote control type	IR / ER‐22601A
Package depth	149 mm
Package width	1005 mm
Package height	621 mm
Package weight	10500 g
Operating temperature (T-T)	5 - 45 °C

Weight and Dimensions

Depth (with stand)	204 mm
Height (with stand)	563 mm
Weight (with stand)	8200 g
Depth (without stand)	86 mm
Width (without stand)	902 mm
Height (without stand)	523 mm
Weight (without stand)	8000 g