Hisense 50H8C Quick Start Guide

6
STEP 1. Attach the TV stand or wall mount bracket (not included)
Attach the TV Stand (For steps to attach the wall mount see page 7)
CAUTION:
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount brackets.
The LED display is very fragile and must be protected at all times when installing the legs that form the stand. Be sure to protect the
TV screen from getting scratched or damaged by any hard objects. In addition, DO NOT exert pressure on the front of the TV at any
time because it could crack.
To attach the left and right leg that forms the stand:
1. Carefully place your TV face down on a soft, flat surface to prevent damage to the TV or scratching to the screen.
2. Remove the 2 legs from the foam and then insert the stands into the bottom slots of the TV.
3. Use the screws that came inside the carton with your TV to secure each leg tightly.
leg
leg
Screws: M4×20
Screws: M4×20

Hisense 50H8C Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Features	high dynamic range, local dimming, 4k upscaling
Tuner	digital
Screen Size	49.5 inches, 50 inches
Refresh Rate	60hz
Closed Captioning	yes
Motion Enhancement	motion rate 120
HDR	yes
HDR Format	hdr 10
Built-In Speakers	yes
Surround Sound	dolby digital
Speakers Output	20 watts
HDMI ARC Ports	yes
USB Ports	3
USB 2.0 Ports	2
USB 3.0 Ports	1
Ethernet	yes
RF Antenna	yes
Bluetooth	no
Network	built-in wi-fi, ethernet
Headphones Output	yes
Digital Optical Audio Outputs	1
Analog Audio Outputs	0
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
VGA Ports	0
Remote Control	standard
3D	no
Power Consumption	145 kilowatt hours
Depth with Stand	9.7 inches
Height with Stand	27.7 inches
Width with Stand	44.1 inches
Net Weight with Stand	28.2 pounds
Depth without Stand	3.3 inches
Height without Stand	25.6 inches
Net Weight without Stand	27.6 pounds