3
To attach the stands:
1.
Carefully place your TV face down on a soft, flat surface to prevent the TV from
being damaged or the screen from getting scratched.
2. Take the 2 stands out of the foam and then align the stands with the screw holes
located on the back of the TV.
3. Secure the stands with the screws in your accessory bag.
STEP 1. Attach the TV stand or wall mount bracket (not included)
Attach the TV Stand
CAUTION:
Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount
brackets.
The LED display is very fragile and must be protected at all times when installing
the stands. Be sure to protect the TV screen from getting scratched or damaged by
any hard objects. In addition, DO NOT exert pressure on the TV screen at any time
because it could crack.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Screws:
M4×12
Stand
Stand
Screws:
M4×12
65"
To Next Page
Loading...
