To Next PageTo Next Page
Need help?Do you have a question about the Hisense AHW-100HCDS1 and is the answer not in the manual?
General| COP | 4.0 |
|---|---|
| Energy Efficiency Ratio (Heating) | A++ |
| Refrigerant | R32 |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature Range (Heating) | -15°C to 24°C |
Critical warning to read manual before installation and operation.
Defines manual's scope, product changes, and claims policy.
Procedures for safe servicing, refrigerant checks, fire safety, and ventilation.
Explanation of safety symbols and additional warnings for safe operation.
Lists outdoor unit models and factory-supplied accessories.
Specifies required space, ventilation, and clearance for unit installation.
Guidelines for selecting appropriate copper pipes and materials.
Table specifying pipe sizes based on capacity and length.
Steps for connecting refrigerant piping, including flare nut tightening.
Instructions for operating and tightening the stop valves.
Precautions and procedures for brazing refrigerant pipes using nitrogen.
Steps for performing air-tightness tests and vacuum pumping.
How to calculate and charge the correct amount of refrigerant.
Chart and table for minimum room size based on refrigerant charge.
Instructions for checking system pressure using check joints.
Ensuring correct power supply, voltage, earth connection, and wiring practices.
Guidelines for using shielded twisted pair and 2-core wires for communication.
Diagrams showing power and transmission cable connections for outdoor units.
Table for selecting wire sizes, circuit breakers, and ELBs.
Instructions for setting dip switches for unit model, functions, and system number.
