If the remote control shows Celsius
temperature. Please press the
" " and " " switches more
than 3 seconds at the same time.
The temperature display of the
remote controller can convert
Celsius to Fahrenheit.
Press switches only with fingers. Do
not press switches by any other
item,as it may break switches.
Fig.3.1Example of Remote Controller
Regarding the instructions of Wired Remote
Control Switch or Wireless Remote Control
Switch,read the operation manual attached to
the control switch.
The pictures of Control Switch are just example.
The matter is related to the optional parts of
customer choices.
3
" "
DQG
" "
VLPXOWDQHRXVO\
WZR
RQO\
WZR
7KHVH
2014- 08 - 18 Fri
If use the Wired Remote Control Switch, the
connecting wire of siginal receptor must be
disconnected. if not , the Wired Remote Control
Switch can not be used.
Press the " " or " " button every time, the
setting temperature will increase or decrease by
1°F. The minimum setting indication is 16°C(61°F)
and the maximum setting indication is 32°C(90°F).
78
℉
To Next Page
Loading...
