10
4.3 Installation
The dimensions of the mounting bracket and the
unit installation are indicated in Fig. 4.3.
4.3.1 Mounting Bracket onto Wall
When the mounting bracket is directly attached
to a wood wall or a concrete wall, check to ensure
of 2000N(0.45kip).
Mounting on a Concrete Wall or a Concrete Block
Wall: Attach the mounting bracket to the wall with
anchor bolts as shown in Fig. 4.4.
Mounting Bracket
Screw
Fig. 4.4 Mounting on Concrete Wall or
Concrete Block Wall
Fixing Screw for
Mounting Bracket
Mounting
Bracket
Utilize Six Screws.
NOTE
Plug
Drill holes of 32mm
(1-17/64in.) in depth
on the wall
The mounting bracket should be installed
so that the side of drain piping connected is
slightly (about 3mm(1/8in.)) lower than the
other side, in order to avoid the incorrect
position of the drain discharge.
(Drain piping connection can be performed
both right side and left side of the unit.)
3m(9.8ft.)
To Next Page
Loading...
