Hisense AVS-07H3FSTD - Page 22

When bending the pipes, firmly fix the pipe at
the heat exchanger side.
Insulation
For Left Side Piping
For Right Side Piping
Contour of
the Unit
Fig. 5.1 Liquid pipe
Bend
the
gas
pipe
at
the
flexible
pipe
part.
Insulation
Fig. 5.2 Gas pipe
14
Contour of the Unit
For Right side Piping
For Left Side Piping
a
c
For Rear Side Piping
For Rear Side
Piping
Model(kBtu/h)
Small Cover
Right Side Cover
64
(
2-33/64)
unit:mm(in.)
5.2 Piping Connection
(1) Position of piping connection is shown in
Figure 5.1 and 5.2.
(2) Piping Direction for the Indoor Unit :Three
directions of piping connection to the indoor
unit can be performed; to the rear side, the right
side and the left side of the unit, respectively.
Therefore, most appropriate piping for a room can
be selected.
Right Side Piping
Take off the small cover from right side.
Take off the small cover from left side.
Rear Side Piping
Bend pipe backwards directly.
Small Cover
Cover
Left Side Piping
Left Side
d
d
18~24
07~14
d
60
(2-23/64)
b
437
(17-13/64)
464
(18-17/64)
373
(14-11/16)
404
(15-29/32)
10R
(25/64R)
20R
(25/32R)
a
c
Model(kBtu/h)
78
(3-5/64)
unit:mm(in.)
d
18~24
07~14
76
(3)
b
396
(15-19/32)
431
(16-31/32)
318
(12-33/64)
355
(13-31/32)
25R
(63/64R)
20R
(25/32R)