Control panel
Use your appliance according to the
following regulations, your appliance
has the corresponding functions as the
control panels showed in the pictures
below.
Temperature regulator in refrigerator
chamber
● Insufficient refrigeration in chamber.
Set the temperature controller at
“COLDER”.
● Using the refrigerator in normal.
Set the temperature controller at “MID”.
Important!
High ambient temperatures (e.g. on hot
summer days) and a colder setting on
the temperature regulator can cause
the compressor to run continuously or
even non-stop!
So we do not advise the user set the
temperature control knob at “COLDER”
or “COLD” in normal.
Reason: when the ambient
temperatures high, the compressor
must run continuously to maintain the
low temperature in the appliance.
Temperature regulator in freezer
chamber
The temperature regulator allows you
to regulate the temperature inside the
Freezer.
● In case of too much frozen food or ice
making in chamber.
Please set the temperature control
knob at “COLDER”position.
● In case of using the refrigerator
usual condition. Please set the
temperature regulator at the middle
position.
● In case of a little frozen food in
chamber.
Please set the temperature controller
at “COLD” position.
Important!
So we do not advise the user set the
temperature control knob at
“COLDER” or“COLD” in normal. When
you turn the knob to "COLD” which
can lead to the more energy efficiency
.Otherwise, it would result the
energy-consuming.
Important!
Don't place too much food directly
against the air outlet of the
temperature sensor part in Wind
channel cover of the refrigerator
compartment, as it affects that the
appliance can't operate correctly.
Temperature
sensor part
11
To Next Page
Loading...
Need help?
General
