Hisense HR6BF47 User Manual (English)

Questions and Answers:

L
Lindsay PierceAug 1, 2025
What to do if my Hisense HR6BF47 Refrigerator does not work?
- T
  Timothy SingletonAug 2, 2025
  If your Hisense Refrigerator isn't working, there are several potential causes: * The appliance might not be switched on, so ensure it is. * The mains plug may not be properly inserted or could be loose; check that it's correctly plugged in. * A fuse might have blown or be defective; inspect the fuse and replace it if needed. * The socket itself could be defective; in this case, it's best to consult with an electrician to correct any mains malfunctions.
A
Andrew KelleyAug 9, 2025
Why is my Hisense Refrigerator food too warm?
- Z
  zimmermanpaulAug 9, 2025
  If the food in your Hisense Refrigerator is too warm, consider these possibilities: * The temperature may not be properly adjusted. Please look in the “initial Start Up” section for guidance. * The refrigerator door may have been open for too long. Ensure you only open the door when necessary. * A large amount of warm food might have been placed in the refrigerator recently. Try turning the temperature regulation to a colder setting temporarily. * The appliance could be near a heat source. Refer to the “installation location” section for advice.
J
johnsnicholasAug 17, 2025
How to fix unusual noises coming from Hisense HR6BF47 Refrigerator?
- J
  John WyattAug 17, 2025
  If your Hisense Refrigerator is making unusual noises, here are a few things to check: * Ensure the appliance is level by readjusting the feet. * Make sure the refrigerator isn't touching the wall or other objects. If it is, move it slightly. * Inspect the components on the rear of the appliance, such as pipes, to ensure they are not touching other parts or the wall. If necessary, carefully bend the component out of the way.
W
Wendy BrownAug 25, 2025
Why is my Hisense HR6BF47 cooling too much?
- S
  Susan MyersAug 25, 2025
  If your Hisense Refrigerator is cooling excessively, it's possible that the temperature is set too cold. To resolve this, try turning the temperature regulator to a warmer setting temporarily.