Hisense HR6BF47 - Door Reversal Procedure

8
Reversing the door
The side at which the door opens can be changed from the right side (as supplied)
to the left side, if the installation site requires.
Tools you will need
1、8mm socket driver 2、cross-shaped screwdriver
3、Putty knife or thin-blade screwdriver
①
⑨
⑧
⑦
⑥
⑤
④
③
②
1. Remove the upper hinge cap (1).
2. Using a sharp object, pry out the plug buttons(5).
3. Remove the two Phillips screws(2) that connect the upper hinge(3) on the right
side of the cabinet top.
4. Carefully lift the door and place it on a padded surface to prevent it from