EasyManua.ls Logo

Hisense BIM325GI63DBG - Installation Instructions; Installation and Connection Requirements

Hisense BIM325GI63DBG
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Installation Instructions
This appliance is only intended for domestic use.
This oven is intended for built-in use only. It is not
intended for counter-top use or for use inside a cupboard.
Please observe the special installation instructions.
The appliance can be installed in a 60cm wide wall-
mounted cupboard.
The appliance is fitted with a plug and must only be
connected to a properly installed earthed socket.
The mains voltage must correspond to the voltage
specified on the rating plate.
The socket must be installed and connecting cable must
only be replaced by a qualified electrician. If the plug is
no longer to accessible following installation, an all-pole
disconnecting device must be present on the installation
side with a contact gap of at least 3mm.
Adapters, multi-way strips and extension leads must not
be used. Overloading can result in a risk of fire.
The accessible surface may be hot
during operation.
Installation and
connection
26

Related product manuals