Need help?Do you have a question about the Hisense DC Inverter Unitary Series and is the answer not in the manual?
General| Type | DC Inverter Unitary Series |
|---|---|
| Refrigerant | R410A |
| Phase | 1 |
| Cooling Capacity | Varies by model |
| Heating Capacity | Varies by model |
| EER | Varies by model, up to 12.5 |
| SEER | Varies by model |
| HSPF | Varies by model |
| Voltage | 208/230V |
| Airflow Rate | Varies by model |
| Sound Level | Varies by model |
| Dimensions (Outdoor Unit) | Varies by model |
| Weight (Outdoor Unit) | Varies by model |
| Indoor Unit Compatibility | Compatible with Hisense indoor units |
Notes on compressor stop, cooling, heating, and defrosting operations.
Common issues and solutions for the air conditioner.
Visual representation of the refrigerant's path through the system.
Schematic showing electrical connections for indoor and outdoor units.
Crucial safety precautions and warnings during installation.
Lists the necessary tools and instruments for the installation process.
Detailed steps and considerations for installing the indoor unit.
Guidelines for preparing and connecting refrigerant pipes.
Instructions for installing the drain piping to ensure proper drainage.
Steps for performing electrical wiring connections safely and correctly.
How to adjust the static pressure for AC and DC motor types.
Site selection and installation procedures for the outdoor unit.
Procedures for flaring, connecting, insulating, and taping refrigerant tubes.
Steps for purging air and performing a test run of the system.
Final checks, safety recommendations, and wire selection guide.
To Next Page