EasyManuals Logo

Hisense FV306N4CW2 User Manual

Hisense FV306N4CW2
Go to English
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #132 background imageLoading...
Page #132 background image
Display controls
We recommend that when you start
your refrigerator for the first time, the
temperature for the refrigerator is set to
-18°C. If you want to change the
temperature, follow the instructions
below.
Controlling the temperature
This feature also helps to keep the
vitamins and nutrition of fresh food for
longer period.
super freeze function. The light will
come on and the freezer temperature
setting displays -24.
Super freeze automatically switches
off after 26 hours and the freezer
temperature will revert back to the
previous setting.
When super freeze function is on,
you can switch off super freeze function
by pressing “Super” or “Temp” button,
then the freezer temperature setting or
function mode will revert back to the
previous setting.
Press “Super” button to activate the
Super will quickly lower the
temperature within the freezer
so food will freeze faster.
1. Temp
2. Super
All functions and controls of the unit are
accessible from a control panel
conveniently located on the roof
refrigerator body. A display circuit board
allows easy configuration of features
and settings in a simple and intuitive
manner.
Important!
When the refrigerator is energized, all
the pilot lights will turn on for 3 sec and
you will also heard a long sound of
“beep”. The display board consists of
four buttons and eight pilot lights. You
will heard a short sound of “beep”
when you press the button.
Caution! When you set a temperature,
you set an average temperature for the
whole refrigerator cabinet.
Temperature inside the compartment
may vary from the temperature values
displayed on the panel, depending on
how much food you store and where
you place them. Ambient temperature
may also affect the actual temperature
inside the appliance.
-18
-20
-16
-24 -22
-14
13
Press “Temp” button to set
freezer temperature between -
14 and -24 as needed,
and the light of the comparable
t e m p e r a t u r e w i l l b e l i g h t e n
corresponding values according to the
following sequence.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense FV306N4CW2 and is the answer not in the manual?

Hisense FV306N4CW2 Specifications

General IconGeneral
BrandHisense
ModelFV306N4CW2
CategoryRefrigerator
LanguageEnglish

Related product manuals