➢ When the oven first plugged in, beep will sound and the display will show "1:01".
➢ In the process of setting, broke about 30 seconds the oven will return to standby
mode.
➢ During cooking, if press STOP/CANCEL button once, the program will be paused,
then press START/+30 SEC button to resume, but if press STOP/CANCEL button
twice, the program will be canceled.
➢ After cooking end, the screen will display End and the system will sound beeps to
remind user every two minutes until user press STOP/CANCEL button or open the
door.
➢ In the process of operation, press a valid button, the buzzer rings once, but if press
a invalid button, the buzzer rings twice.
Setting the Clock
This is a 12- or 24- hour clock, and you can select it by pressing CLOCK SETTING
button in standby mode.
1. In standby mode, press CLOCK SETTING button once to select 12- hour clock(the
display will show “Hr 12” ), and then press it again to select 24- hour clock(the
display will show “Hr 24”).
2. Use number buttons to enter correct time.
3. Press CLOCK SETTING button to confirm.
NOTE: During cooking, the current clock time can be seen by pressing CLOCK
SETTING button.
Express Cooking
Use this feature to program the oven to microwave food at 100% power conveniently.
In standby mode, press START/+30 SEC button repeatedly to enter cooking time (each
press to increase 30 seconds, and up to 99 minutes and 99 seconds)., the oven will
auto start cooking at full power level.
NOTE: During express cooking and microwave cooking, you can add cooking time by
pressing START/+30 SEC button(up to 99 minutes and 99 seconds).
Timer Function
You can use the timer feature, when you need to be reminded of the cooking or some
other things.
To Next Page