11
9. Replace the lower hinge part to the left
side and fixing it with the flange screws.
Replace the front feet fixed board to
another side and fixing it with the flange
screws. Install the adjustable bottom
feet parts.
10. Transfer the lower door to the property
position. Secure the door’s level, make
the lower hinge pin into the lower hole of
the door, then tighten the bolts.
11. Upturn the middle hinge part the direction
180 degree, transfer it and adjust its
position, Make the middle hinge axis into
the upper hole of the lower door, tight the
bolts.
12. Transfer the upper door to the appropriate
position. Secure the door’s level; make
the middle hinge axis into the lower hole
of the upper door.
13. Transfer the upper hinge part and make
the upper hinge axis into the upper hole of
the upper door, and adjust the position of
the upper door(please support the upper
door with your hand when doing it), fixing
the upper hinge part with the flange
screws.
14. Install the screw hole cover on the top
right corner of the refrigerator. Install the
upper hinge cover (which is in the plastic
bag) on the left corner and screw it. Put
the other upper hinge cover into the
plastic bag.
15. Open the lower door and install the door
shelves, then close it.
lower hin
To Next Page
Loading...
Need help?
General
