EasyManua.ls Logo

Hisense HR6VFF255 - Installation Instructions; Installation Requirements; Ventilation Requirements; Leveling the Appliance

Hisense HR6VFF255
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Climate classification Ambient temperature
SN 10~32ć
N 16~32ć
ST 16~38ć
T 16~43ć
Your appliance will be heavy when loaded with foods and must therefore be placed on a strong
firm floor and ensure the power socket is accessible.
Ventilation Requirements
Ensure that the air can circulate freely around the cabinet. There should be 100mm between the
top of the appliance and any overhanging furniture, and a gap of 25mm on either side of the
appliance.
Ensure that the appliance does not stand on the electrical supply cable. Parts that heat up should
not be exposed. Whenever possible the back of the appliance should be close to a wall but
remember to leave the suitable distance required for ventilation.
Leveling
The appliance should be level in order to eliminate rocking. To make the appliance level, it
should be upright and both adjusters should be firmly contacted with the floor. You can also
adjust the level by screwing out the appropriate level adjuster at the front (use your fingers or a
suitable spanner), but much care should be taken when moving this appliance as it may be heavy.

Related product manuals