Adjusting the picture menu
To adjust the picture:
1 Press [MENU] to open the main menu.
2 Press to select Picture menu.
3 Press [P+/P-] to highlight an option, then press
to adjust the option. You can adjust:
Brightness – Increases the brightness to add
more light to dark areas of the picture. Decreases
the brightness to add more dark to light areas of
the picture.
Contrast – Increases the picture level to adjust
the white areas of the picture. Decreases the
picture level to adjust the black areas of the
picture.
Color – Adjusts the intensity of the colors.
Sharpness – Increases the sharpness level to
show cleaner and clearer images. Decreases the
level to show a smoother picture.
Tint - change the picture quality when there is a
NTSC signal at AV/S-video source.
Color Temperature–Changes the color
temperature. You can select Cool, Cooler, Warm,
Warmer, Medium.
4 If you press [P+/P-] to select the Enhanced Setting
option, then press [P-/OK] to enter. You can select
Film Mode or Noise Reduction; press [V+/V-] to
adjust the option.
Enhanced Setting–Accesses advanced video
settings such as:
Film Mode – To select Film mode: On or Off.
Noise Reduction–Reduces video noise in moving
images without blurring the picture.
5 To exit press [Exit].
[V+/V-]
[V+/V-]
Backlight -Adjust backlight to suit light conditions
in the room. Under low room illumination, the use
of lower backlight settings is recommended for
reduced power consumption and extended life of
the flat panel of your television.
17
0%... 57.75MHz TV
TV : 1 Pr og ram(s )
DTV : 0 Prog ra m(s )
Rad io : 0 Prog ra m(s )
Pres s <Menu> to ski pT V ba nd .
Pres s <Ex it> to stop.
Skip band Exit Stop tuning
Channel Tuning
Adjusting the Channel Menu
1 Press [MENU] to open the main menu.
2 Press [V+/V-] to select Channel.
Press to select
ress to
v
Auto Tuning
This is the easiest and most effective way to install all
channels available in your area automatically.
-In both the Analog and Digital signal source
[P+/P-] Auto Tuning.
P [OK] start an automatic search, and this
will memorize all the available channels.
Auto Tuning will take a few minutes; please wait
until it has finished.
Using the TV features
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Channel
Select
Conf irm
Exit
Auto Tuning
Picture
ExitExit
Brightness 50
Contrast 50
Color 50
Sharpness 50
Tint 0
Backlight 16
Color Temperature Medium
Enhanced Setting
Select
Confirm
Brightness
22
L R
L R
To Next Page
Loading...
Need help?
General