- 17 -
4.2 USB upgrading unsuccessfully
If USB upgrading unsuccessfully, then need burning the Nand Flash program file“ *.bin ”to the
Nand Flash.
Hardware connecting
Connect the unit to your pc with a USB-to-serial port cable. USB port connects to your PC and
serial port to the TV’s RS232 port. As following
4.2.1 Install the driver
Double click the icon , install the driver.
Select the default value, the driver will be installed step by step.
Connect to
the TV RS232
port
USB Connect to
the PC
To Next Page
Loading...
Need help?
General