Hisense MT5659AUHT - Upgrading with the Flashtool V0.7.0.7.Exe

- 35 -
4.3 Upgrading with the FlashTool v0.7.0.7.exe
1、FlashTool is a green program needing no installation. After Connect the unit to your
pc with a USB-to-serial port cable，run FlashTool v0.7.0.7.exe.
Please refer to the following
steps to set.
How to choose communicate port and flash baud rate? See the following instruction.
Set *bin file
Select Memory
Card
Select mode
of main chip
Communicate port
Set Flash
Baud Rate
serial port