Hisense PureFlat RB22A2FSE - Temperature Settings and Unit Conversion

“Switching Celsius and
Fahrenheit”
1. Press “ ” or “ ” repeatedly until the
Celsius/Fahrenheit Indicator “ ” or “ ”
blinks.
2.Press the Confirm Control “ ” for the
first time, and “ ” or “ ” will be always
on. After that, each time you press the
Confirm Control “ ”, the temperature
will be switched between °C and °F, and
the temperature setting value of the
corresponding unit will be displayed in
the temperature area.
“Fridge temperature control”
NOTE
1. Once the appliance is powered on, all icons on the display panel will be lit for 3
seconds with a buzzer sound.
2. All the icons will go off on the condition of all keys untouched and all doors closed
for one minute.
3. The control panel will light up when the door is open or you touch any button.
4. Setting the refrigerator running at high temperature will accelerate food
decomposition. For optimum food preservation, we recommend that when starting
the refrigerator for the first time, the temperature of fridge is set to 39°F (4°C), and
that of the freezer to 0°F (-18°C).
The temperature only means the average temperature of the whole refrigerator
cabinet. Temperatures inside each compartment may vary from those displayed
on the panel, depending on how much food stored and where the refrigerator is
placed. In addition, the actual temperature from higher room and lower room will
be different.
CAUTION
1. Press “ ” or “ ” repeatedly until the
Fridge icon “ ” blinks.
2. Press the Confirm Control “ ” for the
first time, and the Fridge icon “ ” will be
always on. After that, press the Confirm
Control “ ” repeatedly to cycle through
the available temperature settings, from 8°
C to 2°C if you have set temperature type
to Celsius.
8°C- -7C- -6C- -5°C
- - 2°C- - 3°C- - 4°C
If you have set temperature type to
Fahrenheit, the temperature settings cycle
from 46°F to 36°F.
Note: Each press of the button, the
temperature drops one degree.
46°F- - 45°F--44°F--43°F--42°F--41°F
36°F- - 37°F-- 38°F--39°F-- 40°F
“Freezer temperature control”
1.Press “ ” or “ ” repeatedly until the
Freezer icon “ ” blinks.
2.Press the Confirm Control “ ” for thefirst
time, and the Freezer icon “ ” will be always
on . After that, press the Confirm Control “ ”
repeatedly to cycle through the available
temperature settings, from -14°C to -24°C if
you have set temperature type to Celsius.
-14°C- -15°C- -16°C- -17°C- -18°C- - 19°C
- -24°C- -23°C- -22°C- -21°C- -20°C
If you have set temperature type to
Fahrenheit, the temperature settings cycle
from 7°F to -11°F.
7°F- - 6°F- - 5°F-
...
- -11°F- -10°F- -9°F
Note: Each press of the button, the
temperature drops one degree.
14