Relevant information
After the installation
After you have successfully installed
the appliance, you should clean it
thoroughly before using. Cleaning
5
●
to avoid high moisture.
●Keep the appliance out of direct
sunlight，rain or frost. Stand the
appliance away from heat sources
such as stoves, fires or heaters.
Leveling of appliance
Stand your appliance in a dry place
The appliance should be level in order
to eliminate vibration. We recommend
that you level the appliance by the
following steps.
1. Roll the refrigerator into place.
2. Turn the adjustable feet (with your
fingers or a suitable spanner) until it
touches the floor.
Note:
This appliance performs well from
12.8℃ to 43.3℃.The Appliance may not
work properly if it is left for a longer
period at a temperature above or
below the indicated range.
Installing the door handles
Before you use the appliance, please
check the handle. If the handle is loose
you should fix it with a hexangular
screwdriver in the clockwise direction
until handles are securely in place.
Hisense Refrigerator
3.
4. Whenever you want to move the
appliance, remember to turn the feet
back up so that the appliance can roll
freely. Reinstall the appliance when
relocating.
Caution! The rollers, which are not
castors, should be only used for forward
or backward movement. Moving the
refrigerator sideways may damage your
floor and the rollers.
To allow the doors to self-close, tilt
back the top backwards for about
10mm(4”) or 0.5°by turning the
adjustable feet.
Constant
/mm
Model
RF15N1BSD
W1W D D1
700 287.5 625 992.5
Constant
/in
Model
RF15N1BSD
W1W D D1
27.5 11.3 24.6 39
To Next Page
Loading...
