Hisense RT641N4WFE1 User Manual

,
Water Dispenser(only for appliance with
dispenser)
The water dispenser, located in the fridge
door, is for storing drinking water. With this
appliance you can obtain chilled water
easily without opening the refrigerator. You
should review of following tips.
Before using this appliance for the first time,
Before assembling, please drain the water
inside the tank, and check whether the
washer reversed or not.
1. Insert the head into the hole.
2. Fit the tank along the guides on the door.
3.Press down two side of the tank.
4. When you hear a click sound, that
means the installation is completed.
you should use it based on following
instructions:
1. Hold the two sides of the water tank
tightly, then pull up the water tank by
shaking up and down.
2. Unscrew the head, then clean it and the
inside of water tank.
dispenser Pad
water storage box head
water storage box cover
Before using
Assembling
head
Slot
Guide
① ②
③
④
Warning!
Filling water
Caution!
Receiving water
1. Be careful not to press on the head;
2. when fitting the water tank, ensure the
head inserted into the hole first.
1.Open the cover by rotating it upwards.
2.Fill the water.
Do not Fill the water above the level
suggested. Otherwise, it may overflow even
when the cover is close.
You should use the correct cups to receive
water underneath the water dispenser.
Warning!
Don’t push the dispenser lever forward
without cup, it may cause the water leak
from the dispenser.
cover
dispenser pad
suggested position
Middle rack
24

Hisense RT641N4WFE1 Specifications

General

Brand	Hisense
Model	RT641N4WFE1
Category	Refrigerator
Language	English