Hisense U963 - Page 14

12
has been unused for extended periods of time.
1
Connect the USB cable to the USB power adaptor, and
then plug the end of the USB cable into the USB port.
2
Plug the USB power adaptor into an electric socket.
3
Afterthebatteryisfullycharged,disconnectthephone
from the charger. First unplug the charger from the device,
and then unplug it from the electric socket.
Battery charging tips and precautions
• Use only Hisense-approved chargers, batteries, and cables.
Unapproved chargers or cables can cause the battery to
explode or damage the phone.
• Avoidusingyourphonewhenitischarging.Donotcover
your phone or the power adaptor.
• Connecting the charger improperly may cause serious
damagetothephone.Anydamagecausedbymisuseisnot
covered by the warranty.
• IftheACpowersupplyisofalowervoltage,thenalonger
charging time may be needed.
• If non-standard chargers such as computers are used for
charging, then a longer charge time may be needed.
• Fully charge the battery before first using the phone and
disconnectthechargerimmediatelyaftertherstchargeis
completed.
• Remove the charger from the electric socket when not
charging the phone.
• The phone may not start immediately if charging with low