Hisense U963 - Installing SIM and SD Cards; Battery

11
Installing Micro-SIM card/SD card
Before you start using your new phone, you need to set it up.
1
Press and hold the power button. Select
Power o󰀨
to
turno󰀨yourphone.
2
To remove the back cover, hold the phone firmly in one
hand and lift the back cover upwards with the other hand.
3
Insert Micro-SIM card and Micro-SD card.
4
Install the back cover of your phone.
• Only Micro-SIM cards work with the device. Do not
attempt to insert other SIM type, otherwise it may
cause phone damage.
• Do not remove the Micro-SIM/SD card while the
card is being used; otherwise, data loss or damage
may occur. Hisense shall not be liable to any loss,
including data loss, due to misuse of Micro-SIM/SD
card.
• Turno󰀨yourphonebeforereplacingorremoving
its Micro-SIM/SD card.
• Micro-SD card is not included; therefore you need
to buy it separately.
Battery
Charging the battery
Chargethebatterybeforeusingitforthersttimeorwhenit