HISON CROSSKI - Page 34

HISON WATERCRAFT
31
Owner Maintenance
△
! WARNING
Unless specifically instructed otherwise, all owner maintenance procedures should be carried
out with the engine off and the engine safety cut-off removed.
In addition to scheduled servicing the following checks should be carried out by the owner
prior to each use of the Crosski:
 Operation of lights, instrument and warning indicators
 Operation of brakes
 Indications of fluid leaks or loose parts
 Condition of hull and seals
 Engine oil level
 Coolant level
 Fuel level
 Tire pressures
NOTICE: levels or uneven tire wear should be rectified immediately
Maintenance safety
△
! WARNING
 Gasoline vapors can explode. Before starting the engine operate the ventilation blower for
4 minutes by turning the ignition key to the ON position. Remove the seat and check the
engine compartment for gasoline vapors.
 Never leave the engine running in an unventilated area – exhaust gases are poisonous and
extremely dangerous.
 Keep your hands and clothing away from rotating components and cooling fans. Some
fans may continue to operate for 30 seconds or more after the ignition is turned OFF.
 Remove wrist bands and jewelry, before working in the engine compartment
 When filling-up fluid reservoirs, position a cloth around the neck of the reservoir to
absorb any fluid spillage which could result in a fire.
 Never leave any objects tools or cleaning rags in the bilge or engine compartment. These
could either cause damage to the Crosski, components or are a potential source for a fire.
 If the Crosski has been ridden recently, do not touch any exhaust or cooling system
components until they have cooled.
Poisonous fluids