HISON WATERCRAFT
33
The battery contains sulfuric acid and can emit explosive mixtures of hydrogen and oxygen.
Always store in a well ventilated area.
Do not allow any open flames, or other sources of ignitions near the battery as it may cause an
explosion.
Always wear safety glasses or a face shield when working on or near the battery.
Do not allow the battery electrolyte to come in contact with your skin or eyes. It is both
corrosive and toxic, and the resulting injuries can be severe. If any electrolyte comes into
contact with your skin or eyes, rinse the affected area immediately with clean cold water and
seek medical advice.
Make sure metal tools or jewelry do not make contact with battery terminals – the resultant
short circuit and sparking may cause personal injury or damage to the electrical system.
Installation is the reverse of the removal procedure and adheres to the following:
Only fit a replacement battery of the same specification and size as the original
Make sure the battery leads are connected to the correct terminals.
Battery disposal
Batteries are hazardous waste. Safely dispose of used batteries at an authorized recycling
center.
Water intake and jet impeller cleaning
Remove engine safety cut-off from switch and allow the jet thrust impeller to stop rotating
before removing any foreign object caught in the propulsion system.
Keep away from intake grate while engine is running as items such as long hair, loose clothing
ropes or PFD straps can become entangled in moving parts. The jet impeller runs whenever the
engine speed exceeds 2000 rpm in both Land and Marine modes.
Avoid riding through heavy land and marine foliage, as objects can get caught on the intake
grate drive shaft and/or impeller.
To clean an obstruction:
1. If possible, return the Crosski to land.
2. Switch off the engine and remove the engine safety cut-off.
3. Try to clear the obstruction from the intake grate by pulling or cutting away any foreign
material.
4. Flush the intake grate with water from a hose to remove any loose debris.
5. Inspect the intake grate and ride plate for sighs of damage. Contact a Hison dealer.
To Next Page
Loading...