Fluid leakage Replace all damaged
parts.
NOTE:
Hold the vehicle in an upright position and
apply the brake pedal.
5. Install:
·console
·seat
BLEEDING THE HYDRAULIC BRAKE
SYSTEM
WARNING
:
Bleed the brake system if:
·
The system has been disassembled.
·
A brake hose or brake pipe have been
loosened or removed.
·
The brake fluid has been very low.
The brake operation has been faulty. A
loss of braking performance may occur
if the brake system is not properly bled.
1. Bleed:
·brake system
a. Add the proper brake fluid to the reservoir.
b. Install the diaphragm. Be careful not to spill
any fluid or allow the reservoir to overflow.
c. Connect the clear plastic hose ① tightly to
the caliper bleed screw ②.
To Next Page
Loading...