Hitachi Koki C 10FSB User Manual

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the power tool. Please keep this manual available for other
users and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de
sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un en
droit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar en lesiones
de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
Model Slide Compound Saw
Modèle Scie a coupe d’onglet radiale
Modelo Tronzadora radial abatible
C 10FSH
C 10FSB
(Laser Marker Equipment)
(Equipement à marqueur laser)
(Equipo con marcador láser)

Hitachi Koki C 10FSB Specifications

General

Brand	Hitachi Koki
Model	C 10FSB
Category	Saw
Language	English

Summary

HITACHI SLIDE COMPOUND SAW MANUAL

General Safety Instructions and Warnings

Crucial safety warnings and guidelines for operating the power tool, presented in multiple languages.

Core Safety Principles and Information

Safety Information and Signal Word Meanings

Explains important safety precautions and defines signal words like WARNING, CAUTION, and NOTE for hazard communication.

Detailed Safety Rules for Power Tool Use

Safe Operation Do's and Don'ts

Provides specific instructions and prohibitions for safe operation, covering personal safety and tool handling practices.

Parts, Accessories, and Repair Information

Replacement Parts and Authorized Service

Guidance on using identical replacement parts and seeking repairs from authorized service centers.

Operational Guidelines and Safety Features

Extension Cord Use and Double Insulation

Recommendations for selecting correct extension cords and explanation of the double insulation system for user safety.

Operation and Maintenance Overview

Name of Parts Identification

Illustrates and labels all components of the slide compound saw for easy identification and reference.

Technical Specifications

Sawing Dimensions and Performance Data

Detailed technical specifications including model, power, dimensions, capacities, and operating ranges.

Accessories and Applications

Standard, Optional Accessories, and Use Cases

Lists included and optional accessories, and specifies suitable materials like wood and aluminum for cutting.

Pre-Operation Preparation Steps

Installation and Initial Setup

Instructions for securely installing the tool on a workbench, releasing the locking pin, and attaching accessories.

Before Using the Power Tool

Pre-Use Checks and Trial Run

Essential checks before operation, ensuring power source compatibility, blade security, safety cover function, and performing a trial run.

Cutting Setup and Adjustments

Table Insert Positioning and Blade Limit Settings

Procedures for correctly positioning the table inserts and adjusting the saw blade's lower limit for precise and safe cuts.

Advanced Cutting Adjustments

Workpiece Height and Sub Fence Usage

Adjusting the blade limit for large workpieces and instructions for using the sub fence for stable cutting.

Angle Setting and Workpiece Securing

Oblique Angles, Holders, and Precision Stoppers

Guide to setting oblique angles and installing optional holders and stoppers for accurate cuts.

Laser Guide and Safety Features

Laser Line Adjustment and Sub Fence Use

Instructions for adjusting the laser guide line and confirming the correct placement of the sub fence.

Laser Line Calibration

Aligning Laser with Workpiece Markings

Detailed steps for calibrating the laser line by aligning it with ink lines on the workpiece for precision cutting.

Practical Applications - Basic Operations

Switch Operation and Vise Assembly

How to operate the trigger switch and use the standard vise assembly to secure workpieces during operation.

Practical Applications - Cutting Techniques

Standard Cutting and Narrow Workpiece Methods

Guides for performing standard cutting operations and techniques for cutting narrow workpieces safely.

Practical Applications - Advanced Cuts

Cutting Large, Wide, and Bevel Angles

Techniques for cutting large, wide workpieces and performing bevel cuts with the saw.

Practical Applications - Angular Cuts

Miter, Compound, and Grade Cutting Procedures

Instructions for setting and performing miter, compound, and grade cuts using the tool's scales.

Practical Applications - Molding Cuts

Crown Molding Cutting Procedures

Step-by-step guide for accurately cutting different types of crown molding, including angle settings.

Practical Applications - Special Cuts & Dust

Grooves, Deformable Materials, and Dust Bag Use

Procedures for cutting grooves, handling easily deformed materials, and managing sawdust with the dust bag.

Saw Blade Mounting and Dismounting

Safe Blade Installation and Removal

Detailed instructions for safely installing and removing the saw blade, emphasizing necessary precautions.

Maintenance and Component Inspection

Inspecting Blades, Slides, Brushes, and Cover

Guidance on inspecting and maintaining key components like the saw blade, slide pipe, carbon brushes, and safety cover.

Tool Care, Storage, and Service

Storage, Lubrication, Belt Replacement, and Repairs

Guidelines for proper tool storage, lubrication, belt replacement, and information on professional service and maintenance.