To Next PageTo Next Page
Need help?Do you have a question about the Hitachi Koki FDV 16VB2 and is the answer not in the manual?
General| Voltage | 230V |
|---|---|
| Chuck Capacity | 1.5-13mm |
| Drilling Capacity in Steel | 13mm |
| Drilling Capacity in Wood | 40 mm |
| Drilling Capacity in Concrete | 16mm |
| Chuck Size | 13mm (1/2") |
Keep work area clean and well lit. Avoid distractions.
Ensure correct plug, avoid body contact with grounded surfaces, protect from rain/wet.
Stay alert, use safety equipment, avoid accidental starting, do not overreach, dress properly.
Use correct tool, maintain tool, disconnect power before adjustments, store safely.
Have tool serviced by qualified personnel with identical replacement parts.
Exposure to noise can cause hearing loss.
Loss of control can cause personal injury.
Ensure power source conforms to product requirements.
Ensure switch is OFF before plugging in to avoid accidents.
Use a suitable, short extension cord if area is remote from power source.
Attach and tighten the side handle securely for comfortable operation.
Instructions for keyless chuck and chuck wrench.
Choose bits for concrete, metal, wood based on material.
Use bits appropriate for screw diameter to avoid damage.
Verify forward (R) and reverse (L) rotation before use.
Do not apply excessive pressure; it reduces efficiency and tool life.
Handle with care due to reactive force; maintain firm control and balance.
Be alert to release force when bit exits material to prevent damage.
Trigger controls rotation; speed varies with trigger pull; speed dial for pre-selection.
Use appropriate driver bits and pre-drill holes for screws.
