EasyManua.ls Logo

Hitachi 42PD4200 - User Manual

Hitachi 42PD4200
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
ENGLISH
USER'S MANUAL
Thank you very much for purchasing the HITACHI Plasma Display
Monitor.
Before using your monitor, please carefully read the "SAFETY
INSTRUCTIONS" and this "USER'S MANUAL" so you will know how to
operate the monitor properly. Keep this manual in a safe place. You
will find it useful in the future.
Notes on lnstallation Work:
This product is marketed assuming that it is installed by qualifed
personnel with enough skill and competence. Always have an
installation specialist or your dealer install and set up the product.
HITACHI cannot assume liabilities for damage caused by mistake
in installation or mounting, misuse, modification or a natural
disaster.
Note for Dealers:
After installation, be sure to deliver this manual to the customer
and explain to the customer how to handle the product.
42PD4200

Questions and Answers

  • C
    Connie PadillaAug 7, 2025
    What to do if Hitachi Plasma TV remote control does not work?
    • A
      Adam JamesAug 7, 2025
      If the remote control for your Hitachi Plasma TV isn't working, first, check that the batteries are correctly inserted in the remote, ensuring they are not loaded in the opposite direction. Also, verify that the batteries are not depleted and are in good condition.
  • K
    Keith ThompsonAug 11, 2025
    What to do if Hitachi Plasma TV shows 'No Sync. Signal' or 'Power Save'?
    • D
      Dr. Nicholas MatthewsAug 11, 2025
      If your Hitachi Plasma TV displays the message “No Sync. Signal” or “Power Save”, it means no sync signal is detected. Check that the signal cable is correctly connected. Ensure that the connected computer or imaging equipment is turned on and not in power-save mode. Also, verify that the input selection matches the connection terminal.
  • C
    chenmichaelAug 15, 2025
    Why is there no picture on my Hitachi Plasma TV but the power light is on?
    • C
      Claudia CurryAug 15, 2025
      If your Hitachi Plasma TV's power light is on but there's no picture, check the contrast and brightness settings and adjust them to a higher level. Also, ensure the signal cable is properly connected.
  • D
    Dawn MayAug 19, 2025
    What to do if Hitachi Plasma TV shows 'Invalid Scan Freq.'?
    • W
      William EdwardsAug 19, 2025
      If your Hitachi Plasma TV displays the message “Invalid Scan Freq.”, it indicates that an input signal is not being received normally. Check whether the input signal matches the monitor specifications and ensure the signal cable is properly connected.
  • B
    Barbara JohnsonAug 25, 2025
    How to fix a blurred screen on Hitachi Plasma TV?
    • J
      Joseph DavidsonAug 25, 2025
      To fix a blurred screen on your Hitachi Plasma TV where text appears blurred, adjust the dot clock phase for the clearest viewing. This applies to RGB input.
  • M
    Monica ThomasAug 29, 2025
    How to fix a flowing or streaked display image on Hitachi Plasma TV?
    • D
      Denise LewisAug 29, 2025
      To correct a flowing or streaked display image on your Hitachi Plasma TV, adjust the dot clock frequency and phase. Adjust the dot clock frequency first, then adjust the dot clock phase. This applies to RGB input.
  • C
    cisnerosrobertSep 1, 2025
    Why is my Hitachi Plasma TV not turning on?
    • W
      William WestSep 2, 2025
      If your Hitachi Plasma TV is not turning on and the power indicating lamp is off, check the power cable connection and press the power switch.

Hitachi 42PD4200 Specifications

General IconGeneral
Screen Size42 inches
Display TypePlasma
Resolution1024 x 1024
Aspect Ratio16:9
Brightness1000 cd/m²
Contrast Ratio10000:1
Weight32 kg
Dimensions (W x H x D)1054 x 674 x 98 mm
HDMI Ports1
Component Video Inputs2
Composite Video Inputs1
S-Video Inputs1
Speakers2 x 10W
Viewing Angle160 degrees
InputsHDMI, Component, Composite, S-Video

Related product manuals