Hitachi airPoint Room700 - Louver Swing Direction

3. Operation Method
8
A16381H9HL
3.5 Louver Swing Direction
1. This function is used to set the louver direction and is only applicable to indoor units that have an oscillating
louver.
Step1. Press " " " or " " and select "Louver".
Step2. By pressing " " or " "

: Auto swing operation is active. At this time, the louver swings repeatedly on the LCD.
NOTES:
•
For the indoor unit without the auto louver mechanism, the indication of "Louver" is NOT available on the
LCD.
•

further information on the swing function.
•
The louver position on the LCD and the actual louver position may not match during the Auto-Swing.

•

LCD Indication COOL, DRY HEAT, FAN
Auto-Swing
Range for COOL and DRY
Auto-Swing range for COOL and DRY
Range for HEAT and FAN
Auto-Swing range for HEAT and FAN