28
■
Connect the washing machine to an alternating current via a correctly
installed earthed socket only.
■
The mains voltage must correspond to the voltage specifi cation on the
washing machine.
■
Connection specifi cations as well as the required fuses are stipulated
on the washing machine nameplate.
■
Do not plug the washing machine into an extension lead or power strip
with multiple sockets.
■
All four adjustable feet must be fi rmly on the ground. The washing
machine must not wobble.
■
Check the alignment of the washing machine with a spirit level, and
adjust the feet if it’s not aligned.
Loosening
Adjustable leg
Elevating
Lock nut
Loosen the lock nut by
unscrewing in the arrow
direction
then stabilize
the unit with the adjustable
feet.
Lock nut
Tightening
After adjustment, tighten
the lock nut by screwing it
in the arrow direction
.
Plastic base plate
Tighten the lock nut until it
reaches the plastic base plate.
Adjustable leg is not over 25 mm.
How to Install the Washing Machine
Connecting the
power
Level Adjustment
To Next Page
Loading...
