Hitachi C 12FDH User Manual

--- 26 ---
1. Remove the two Machine Screws (W/Washers) M4 x 10 (Black) [71] to remove two Indicators (B) [70].
Remove the two Machine Screws (W/Washers) M5 x 16 [50] to remove the Dust Guide Ass'y [49].
2. Remove the Machine Screw (W/Washers) M4 x 16 [63] to remove the Scale Plate Ass'y [60].
3. Remove the Flat Hd. Screw M6 x 25 [151] by turning the Nylon Nut M6 [153] with a wrench 10 mm. Remove
Sub Fence (A) Ass'y [169] and Plate (D) 24.5 mm [171]. Remove the Flat Hd. Screw M6 x 35 [152] by turning
the Nylon Nut M6 [153] with a wrench 10 mm. Remove Sub Fence (B) Ass'y [155] and Plate (D) 35 mm
[154]. Loosen Knob (B) [146] and remove the Flat Hd. Screw M6 x 25 [151]. Remove Sub Fence (C) Ass'y
[148], Bolt Washer M6 [177] and Spring (C) [147].
4. Remove the four Bolts M8 x 35 [142], Spring Washers M8 [143] and Bolt Washers M8 [144] to remove Fence
(A) [172] and Fence (B) [150].
5. Loosen the Clamp Lever [20] and remove the Machine Screw (W/Washers) M6 x 20 (Black) [19]. Turn the Bolt
(Left Hand) M10 [21] and remove it from the Hinge Ass'y [43] together with Knob (A) [22], Planet Gear [23],
Pinion (A) [24], Ring Gear [25], Plate (H) [26], Tapping Screw (W/Flange) D4 x 16 (Black) [27] and Retaining
Ring for D28 Shaft [28].
Fig. 42
B
B
109
110
108
105
104
106
107
101 102 103
111
112
113
114
123
124
125
142
143
144
146
147
148
149
151
152
153
154
155
156
157
150
158
159
160
162
161
173
174
175 176
126
127
128
126
129
130
131
145
132
133
163
164
165
167
168
169
170
153
171
142
143
144
172
151
121
177
606
607
608

Hitachi C 12FDH Specifications

General

Brand	Hitachi
Model	C 12FDH
Category	Saw
Language	English