Hitachi C 12LSH User Manual

INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce
produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé.
Garder ce mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant
qu’ils utilisent l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and understand
this manual before operating the power tool. Please keep this manual available for other
users and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede
resultar en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
Model Slide Compound Miter Saw
Modèle Scie a coupe d’onglet radiale
Modelo Tronzadora radial abatible
(Laser Marker and Digital Display Equipment)
(Outil avec affichage numérique et marqueur à laser)
(Equipo marcador láser y visualizador digital)
(Laser Marker Equipment)
(Outil avec marqueur à laser)
(Equipo marcador láser)
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
C 12LSH
C 12RSH

Hitachi C 12LSH Specifications

General

Blade Diameter	12 inches
Arbor Size	1 inch
Amperage	15 A
Voltage	120 V
Type	Miter Saw
No Load Speed	4000 RPM
Miter Angle Range	0 - 52 degrees
Bevel Angle Range	0 - 45 degrees
Power Input	1, 800 W
Cutting Capacity at 90°	4 x 12 inches

Summary

Safety Information and Guidelines

Important Safety Information

General precautions and warnings for safe operation of the power tool.

Meanings of Signal Words

Explanation of warning symbols like DANGER, WARNING, CAUTION, and NOTE used in the manual.

General Safety Instructions for Power Tools

Essential safety rules to follow when using any power tool for user protection.

Specific Safety Rules for Power Tool Use

Tailored safety instructions and warnings specific to the operation of this power tool.

Tool Specifications and Accessories

Replacement Parts

Information on obtaining and using identical replacement parts for servicing the tool.

Proper Extension Cord Usage

Guidelines for selecting and using appropriate extension cords to ensure safe operation.

Double Insulation for Safer Operation

Explanation of the double insulation design for enhanced user safety and its maintenance.

Specifications

Detailed technical data including model, power, dimensions, and performance metrics.

Accessories

Lists standard and optional accessories for the power tool, with usage notes.

Operation and Usage

Operation and Maintenance Overview

Introduction to the manual's sections on safe operation and maintenance procedures.

Name of Parts

Identification and labeling of various components of the HITACHI power tool.

Applications

Describes the types of materials and tasks the power tool is designed for.

Preparation Before Operation

Steps required to set up the power tool correctly before starting any work.

Before Using the Tool

Crucial checks and procedures to perform before activating the power tool.

Before Cutting Procedures

Procedures and checks to perform before initiating any cutting tasks with the tool.

Practical Applications

Demonstrates various ways to use the power tool for different cutting tasks.

Saw Blade and Maintenance

Saw Blade Mounting and Dismounting

Step-by-step instructions for safely installing and removing saw blades.

Maintenance and Inspection

Procedures for inspecting and maintaining the power tool's components for longevity.

Service and Repairs

Guidelines on when and how to get the tool serviced or repaired by authorized centers.