English
25
PRACTICAL APPLICATIONS
WARNING: * To avoid personal injury, never remove or place a workpiece on the
table while the tool is being operated.
* Never place your limbs inside of the line next to warning sign while
the tool is being operated. This may cause hazardous conditions (see
Fig. 23).
1. Switch operation
Pull the trigger to turn on the switch, release
it to shut it off.
After releasing the trigger, make sure the
trigger has gone all the way back and the
switch is turned off.
WARNING: This will ensure that the power tool cannot be turned on accidentally
or by someone (especially a child) who is not qualified to use the
power tool.
To prevent unauthorized operation of this tool, insert a padlock
through the hole in the switch trigger.
Hole
Trigger switch
Fig. 24
Warning sign
Line
Warning sign
Line
Fig. 23
To Next Page
Loading...
Need help?
General
