EasyManuals Logo

Hitachi C 18DMR Technical Data And Service Manual

Hitachi C 18DMR
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
--- 3 ---
4-2. New Lithium-ion Battery
The Type EBM 1830 lithium-ion battery is equipped with the overdischarge protection circuit, overload protection
circuit, and voltage monitoring circuit for each cell to prevent reduction of the battery life due to overdischarge
(overuse) or overcharge (excessive charging) of the battery.
The number of charging/discharging is about 1,500.
Precautions for use of the Type EBM 1830 lithium-ion battery
Type EBM 1830 lithium-ion battery is equipped with a protective function that automatically stops output to extend
the battery life. The motor may stop automatically in either of the following case or even if the switch is
depressed continuously during operation. This is because the protective function is activated. The battery is not
faulty.
The motor may stop automatically when the remaining battery level is low (when the battery voltage is
decreased to about 12 V (Type EBM 1830)). Charge the battery immediately in such case.
The motor may stop if the Model C 18DL is overloaded. In such case, release the switch and eliminate the
cause of the overload problem. Then the Model C 18DL is operable.
The Type BCL 1815 lithium-ion battery (optional accessory) is intended for light-duty work. Do not use the Type
BCL 1815 lithium-ion battery with the Model C 18DL. Otherwise, the battery life may be shortened extremely.
Please instruct the customers on the above precautions.
1
2
1
2

Other manuals for Hitachi C 18DMR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi C 18DMR and is the answer not in the manual?

Hitachi C 18DMR Specifications

General IconGeneral
BrandHitachi
ModelC 18DMR
CategoryCordless Saw
LanguageEnglish

Related product manuals