Hitachi C 7SB2/C - Page 21

*
ALTERNATIVE PARTS --- 3 ---
ITEM
NO.
CODE NO.
DESCRIPTION
REMARKS
NO.
USED
PARTS
7 -- 05
C 7SB2
41 301-653 TAPPING SCREW (W/FLANGE) D4X20 (BLACK) 5
42 938-241 BRUSH HOLDER 2
43 999-038 CARBON BRUSH (1 PAIR) 2
44 945-161 BRUSH CAP 2
*45 958-049 CORD ARMOR D8.2 1
*45 940-778 CORD ARMOR D10.7 1
*46 500-453Z CORD 1 (CORD ARMOR D10.7)
*46 500-439Z CORD 1 (CORD ARMOR D8.2) FOR AUS, NZL
*46 500-435Z CORD 1 (CORD ARMOR D8.2) FOR GBR (230V)
*46 500-463Z CORD 1 (CORD ARMOR D10.7) FOR GBR (110V)
*46 500-234Z CORD 1 (CORD ARMOR D8.2) FOR EUROPE
*47 930-804 TERMINAL M4.0 (10 PCS.) 2
*47 980-063 TERMINAL 2 FOR AUS, NZL, EUROPE
48 937-631 CORD CLIP 1
49 984-750 TAPPING SCREW (W/FLANGE) D4X16 2
50 953-121 HEX. HD. TAPPING SCREW D5X50 2
51 320-969 SWITCH (2P SCREW TYPE) 1
52 305-720 TAPPING SCREW (W/FLANGE) D4X12 1
53 320-952 HANDLE COVER 1
54 320-967 GRIP COVER 1
55A 322-260
SEAL LOCK SCREW (W/SP. WASHERS) M6X14 1
56A 322-600 LEVER (A) W/STOPPER 1
57A 322-261 LOCK NUT SET (W/SCREW) 1
58 320-975 WASHER 2
*59 320-961 BASE ASS’Y 1 INCLUD. 55-58, 60, 61, 63-66
*59 324-599 BASE ASS’Y 1 INCLUD. 55-58, 60, 61, 63-66, 71-74
FOR EUROPE
60 319-541
SEAL LOCK HEX. SOCKET SET SCREW M5X6 2
61 320-962 BEVEL PLATE 1
62 949-686 ROLL PIN D6X40 (10 PCS.) 1
63 320-163 STEP PIN D6X13 2
64 942-808 BOLT (SQUARE) M6X20 1
65 320-963 LINK 1
66 308-109
SLOTTED HD. SET SCREW (SEAL LOCK) M6X8 1
67 320-966 LONG NUT 1
68 322-601 LEVER (A) W/O STOPPER 1
*69 324-596 PLATE 1 FOR EUROPE
*70 958-523 MACHINE SCREW (W/SP. WASHER) M4X8 2 FOR EUROPE
*71 324-595 STOPPER 1 FOR EUROPE
*72 958-523 MACHINE SCREW (W/SP. WASHER) M4X8 1 FOR EUROPE
*73 301-806 WING BOLT M6X15 1 FOR AUS, NZL, EUROPE
*74 947-859 LOCK SPRING 1 FOR AUS, NZL, EUROPE