Hitachi C 7SB2/C User Manual

--- 5 ---
6-2. Practical Test Data
The graph below shows a comparison of practical cutting data among the Model C 7SB2 (for USA), C and P.
(Note that the practical cutting data may vary depending on the conditions of the saw blade, workpiece material,
etc.)
Hemlock spruce (thickness 60 mm), vertical cutting
This graph shows the relation between the cutting speed and the load current. If the load current is low, the load
applied to the motor is also low, and generally the cutting capacity is more excellent when comparing the cutting
capacity at the same speed. Although the Model C 7SB2, C and P have almost the equivalent cutting capacity,
the Model C 7SB2 has the most excellent cutting capacity as shown in the above graph.
Cutting speed (m/min.)
Load current (A)
P:
C:
HITACHI
C 7SB2/C 7BD2 (for
USA)

Hitachi C 7SB2/C Specifications

General

Brand	Hitachi
Model	C 7SB2/C
Category	Saw
Language	English