Need help?Do you have a question about the Hitachi c7sb2 and is the answer not in the manual?
Keep work area clean, avoid hazards, use safety gear, and stay alert for safe operation.
Ensure proper grounding, avoid wet conditions, and protect the power cord from damage.
Use correct tool, maintain it, disconnect before adjustments, and store it safely.
Prevent kickback by gripping firmly, stopping cuts, supporting work, using sharp blades, and ensuring tight adjustments.
Ensure the lower guard operates freely, is not tied open, and is used correctly during cuts.
Use correct, sharp blades, ensure guard moves freely, avoid lateral stops, and disconnect power before adjustments.
To Next Page
General
