Need help?Do you have a question about the Hitachi C15FB and is the answer not in the manual?
Technical details and dimensions of the miter saw models.
List of included accessories with model C15FB and C10FB.
List of optional accessories available for separate purchase.
Ensure power source conforms to product nameplate requirements.
Ensure power switch is OFF before plugging in to prevent immediate operation.
Use thick, short extension cords rated for the tool's capacity.
Secure movable parts with pin or chain hook during transport.
Ensure safety cover moves smoothly and is clean for clear visibility.
Confirm spindle lock is released before installing/removing saw blade.
Adjust blade height by turning adjusting bolt, ensuring it doesn't contact turntable.
Install vise on base sides and fix with bolts for workpiece stability.
Use stopper secured by wing bolt for cutting multiple same-length workpieces.
Adjust handle position to reduce up-down movement for efficiency.
Align saw blade with ink line using safety cover lever before cutting.
Detail on how to turn the tool ON and OFF using the trigger switch.
Steps for approaching workpiece, cutting, and retracting handle.
Using angle stoppers and checking alignment for precise bevel cuts.
Using plates for cutting wide workpieces at 0° and 45°.
Steps for mounting saw blade using spindle lock and wrench.
Procedure for removing the saw blade by reversing mounting steps.
Inspect saw blade for dullness and replace if worn to prevent motor issues.
Regularly check and tighten all mounting screws for safety.
Protect motor unit winding from damage, oil, or water.
Check carbon brushes for wear and replace with new ones when near limit.
To Next Page
General