Hitachi C10FSB - 10 Inch Sliding Dual Bevel Compound Miter Saw User Manual

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the power tool. Please keep this manual available for other
users and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort ou de
sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un en
droit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar en lesiones
de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
Model Slide Compound Saw
Modèle Scie a coupe d’onglet radiale
Modelo Tronzadora radial abatible
C 10FSH
C 10FSB
(Laser Marker Equipment)
(Equipement à marqueur laser)
(Equipo con marcador làser)

Hitachi C10FSB - 10 Inch Sliding Dual Bevel Compound Miter Saw Specifications

General

Brand	Hitachi
Model	C10FSB - 10 Inch Sliding Dual Bevel Compound Miter Saw
Category	Saw
Language	English

Summary

SAFETY

IMPORTANT SAFETY INSTRUCTIONS FOR USING ALL POWER TOOLS

Essential safety guidelines for operating any power tool.

MEANINGS OF SIGNAL WORDS

Specific Safety Rules for Use of this Power Tool

Detailed safety rules specific to this power tool's operation.

DON'TS

Lists actions to strictly avoid for safe tool operation.

OPERATION AND MAINTENANCE

NAME OF PARTS

Identifies and labels all components of the slide compound saw.

BEFORE USING

Trial Run

Inspect the rotating stability of the saw blade

Checking the saw blade for wobble or instability.

BEFORE CUTTING

Positioning the table insert

Checking the saw blade lower limit position

Verifying the blade's lowest cutting depth setting.

Lower limit position of saw blade when cutting a large workpiece

Oblique angle

Securing the workpiece

Position adjustment of laser line (Only Model C10FSH)

Adjusting the laser line for accurate cutting guidance.

PRACTICAL APPLICATIONS

Switch operation

Using the Vise Assembly (Standard accessory)

Cutting Operation

General procedure for performing cuts with the saw.

Cutting narrow workpieces (Press cutting)

Cutting large workpieces

Cutting wide workpieces (Slide cutting)

Bevel cutting procedures

Steps for setting up and performing bevel cuts.

Miter cutting procedures

Steps for setting up and performing miter cuts.

Compound cutting procedures

Instructions for performing cuts that combine miter and bevel angles.

Crown molding cutting procedures

Specific methods for cutting crown molding profiles.

30° and 33.9° left slant setting method

Cutting method of crown molding without tilting the saw blade.

Groove cutting procedures

Cutting easily-deformed materials, such as aluminum sash

SAW BLADE MOUNTING AND DISMOUNTING

Mounting the saw blade

Step-by-step guide to attach a new saw blade securely.

Dismounting the saw blade

Steps to safely remove the saw blade.

MAINTENANCE AND INSPECTION

Inspecting the saw blade

Adjusting a loose slide pipe

Inspecting the carbon brushes

Inspecting the safety cover for proper operation

Verifying the safety cover functions correctly before each use.

SERVICE AND REPAIRS

Cleaning