Hitachi C10RA2 User Manual

INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
WARNING
Improper and unsafe use of this power tool can result in death or serious bodily
injury! This manual contains important information about product safety. Please
read and understand this manual before operating the power tool. Please keep this
manual available for others before they use the power tool.
MODE D’EMPLOI ET INSTRUCTIONS DE SECURITE
AVERTISSEMENT
Une utilisation incorrecte et dangereuse de cet outil motorisé peut entraîner la mort
ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de
ce produit. Prière de lire et d’assimiler ce mode d’emploi avant d’utiliser l’outil
motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs avant
qu’ils utilisent l’outil motorisé.
MANUAL DE INSTRUCCIONES E INSTRUCCIONES DE SEGURIDAD
ADVERTENCIA
¡La utilización inapropiada e insegura de esta herramienta eléctrica puede resultar
en lesiones serias o en la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea
y comprenda este manual antes de utilizar la herramienta eléctrica. Guarde este
manual para que puedan leerlo otras personas antes de que utilicen la herramienta
eléctrica.
MODEL TABLE SAW
MODELE SCIE SUR TABLE
MODELO SIERRA DE MESA
C 10RA2

Hitachi C10RA2 Specifications

General

Type	Miter Saw
Blade Diameter	10 inches
Motor Power	15 amps
Amperage	15 amps
Max Cutting Capacity (Horizontal)	12 inches
Weight	26.5 lbs
Arbor Size	5/8 inches
No-Load Speed	5000 RPM
Bevel Angle Range	0° to 45°

Summary

Instruction Manual and Safety Instructions

Important Information

Safety

General Safety Instructions for All Power Tools

Provides essential safety guidelines for the safe operation of all power tools.

Specific Safety Rules for Power Tool Use

Grounding Instructions

Operation and Maintenance

Name of Parts

Identifies and labels the various components and parts of the table saw.

Specifications

Preparation Before Operation

Installation

Steps for securely installing the table saw onto a workbench, stand, or cabinet.

Assembly Procedures

Mounting and Adjusting Saw Blade Guard Assembly

Adjustment

Adjustment of Saw Blade Parallel to Miter Gauge Groove

Procedure to ensure the saw blade is perfectly parallel to the miter gauge groove.

Adjusting 90° and 45° Positive Stops

Adjustment of Rip Fence

Before Using

Trial Run

Inspect Rotating Stability of Saw Blade

Practical Applications

Raising and Lowering Saw Blade

Saw Blade Tilting Operation

Rip Fence Operation

Miter Gauge Operation

Warnings on Operation

Operating Instructions

Ripping

Detailed steps and safety precautions for performing rip cuts on the table saw.

Bevel Ripping

Cross Cutting

Bevel Ripping (Cross Cutting)

Mitering

Dado Cutting

Mounting the Dado Blade Set

Saw Blade Mounting and Dismounting

Mounting the Saw Blade

Dismounting the Saw Blade

Maintenance and Inspection

Component Inspection and Maintenance

Service and Repairs