To Next PageTo Next Page
Need help?Do you have a question about the Hitachi C12RSH - 305mm Slide Compound Mitre Saw and is the answer not in the manual?
General| Blade Diameter | 305 mm |
|---|---|
| Max Cutting Depth at 90° | 107 mm |
| Max Cutting Width at 90° | 312 mm |
| Max Cutting Width at 45° | 220 mm |
| Dust Collection | Yes |
| Voltage | 230 V |
| Bevel Range | 0° - 45° |
| Mitre Range | 57° right, 45° left |
| Mitre Angle Range | 0° - 57° right, 0° - 45° left |
| No Load Speed | 4000 rpm |
Understand manual instructions before use.
Visual indicators for safety requirements like eye and hearing protection.
Essential safety measures for operating electric tools to prevent injury.
Guidelines for tool repair, maintenance, and using authorized service centers.
Maintaining a clean, well-lit, and safe workspace around the miter saw.
Guidelines for correct tool usage and materials to avoid.
Recommended PPE for safe operation, including hearing and eye protection.
Detailed technical data, dimensions, and capacities of the saw.
Ensuring the lower guard moves smoothly for safe operation.
Adjusting the blade's lowest point for proper cutting.
Precautions for handling workpieces to prevent injury during operation.
Proper use of sub fence (A) for stable cutting, especially at angles.
Proper use of sub fence (B) for stable cutting, especially at angles.
Steps to align the laser line with the saw blade for precise cuts.
Warnings and precautions regarding laser radiation exposure.
Using the digital display for angle readings and resetting functions.
Ensuring alignment between the digital display and machine angles.
Steps for performing cuts, including blade alignment and depth control.
Techniques for cutting narrow (press) and wide (slide) workpieces.
Step-by-step guide for setting and performing miter cuts.
Fine-tuning the miter angle for precise cuts.
Steps for setting up and performing bevel cuts with safety warnings.
Fine-tuning the bevel angle for accurate cutting.
Performing cuts combining miter and bevel angles for complex joints.
Using auxiliary equipment for cutting long workpieces.
How to install optional holders and stoppers for workpieces.
Installing and using optional accessories for crown molding cuts.
Step-by-step guide for safely installing the saw blade.
Steps for safely removing the saw blade.
Inspecting saw blade, screws, carbon brushes, and lower guard for wear.
Procedures for replacing brushes, guards, belts, and motor maintenance.
Lubrication, cleaning the tool, and proper storage instructions.
Warnings about repair, modifications, and using authorized service centers.
