Hitachi C10FCE2 - 10 Inch Compound Miter Saw User Manual

SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the power tool. Please keep this manual available for other
users and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort
ou de sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar en lesiones
de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda este
manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan leerlo otras
personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado en un lugar seguro.
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
Model Compound Saw
Modèle Scie à onglets
Modelo Ingletadora
C 10FCH
C 10FCE
(Laser Marker Equipment)
(Equipement à marqueur laser)
(Equipo con marcador làser)
00_cover_c10fch_e.p65 2/7/04, 15:571

Hitachi C10FCE2 - 10 Inch Compound Miter Saw Specifications

General

Blade Diameter	10 Inch
Motor Power	15 Amp
No-Load Speed	5000 RPM
Arbor Size	5/8 inch
Voltage	120V
Miter Angle Range	0-52 degrees (left and right)
Bevel Angle Range	0-45 degrees (left)
Dust Collection	Yes

Summary

SAFETY INSTRUCTIONS

Signal Word Meanings

Explains the meaning of hazard signal words like WARNING and CAUTION.

General Safety Rules

Key safety rules and precautions for operating power tools.

Specific Operation Safety

Detailed DO's and DON'Ts for safe operation of the compound saw.

TOOL INFORMATION AND SETUP

Replacement Parts and Extension Cords

Information on replacement parts, proper extension cord use, and insulation.

Pre-Operation Preparation

Steps for installation, accessory setup, and pre-use checks.

CUTTING PROCEDURES

Before Cutting Setup

Essential steps and checks before commencing any cutting operations.

Laser Line Adjustment

Steps to align the laser line for accurate cutting.

Cutting Techniques and Operations

Covers switch operation, vise usage, and general cutting methods.

Specific Cut Types

Guides for miter, bevel, compound, and crown molding cuts.

SAW BLADE MANAGEMENT

Mounting and Dismounting

Step-by-step process for safely installing and removing the saw blade.

MAINTENANCE AND INSPECTION

Saw Blade and Component Checks

Guidelines for checking the saw blade, levers, guards, and screws.

Motor Care and Storage

Precautions for motor care, dust removal, and safe tool storage.

SERVICE AND REPAIRS

Authorized Repair Center

Information on when and how to get the tool serviced or repaired.