Hitachi C10RA3 - 10 Inch Portable Table Saw User Manual

English
M
odel
Modèle
Modelo
J
obsite Table Saw
S
cie sur table pour chantier
Lugar de trabajo de la sierra de mesa
C 10RA3
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
I
mproper and unsafe use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand this manual
before operating the power tool. Please keep this manual available for others before they use the power
tool.
WARNING
MODE D’EMPLOI ET INSTRUCTIONS DE SECURITE
AVERTISSEMENT
Une utilisation incorrecte et dangereuse de cet outi
l motoris
é peut entraîner la mort ou de
s
érieuses blessures corporelles!
Ce mode d’emploi contient d’im
portantes infor
mations
à propos de la s
écurit
é de ce produit.
Pri
ére de lire et d’assimiler ce mode d’emploi avant d’utiliser
I’
outil motoris
é. Garder ce mode
d’emploi
à la disponibli
lit
é des autres utilisateur
s avant qu’ils utilisent I’outil motoris
é.
MANUAL DE INSTRUCCIONES E INSTRUCCIONES DE SEGURIDAD
La utilización inapropiada e insegura de esta herramienta el
éctrica puede resultar en lesiones
serias o en la muerte!
Este manual contiene informaci
ón importante sobre la seguridad del producto. Lea y comprenda
este manual antes de utilizar la herramienta el
éctrica. Guarde este manual para que puedan
leerlo otras personas antes de que utilicen la herramienta el
éctrica.
ADVERTENCIA
!
La utilización inapropiada e insegura de esta herramienta el
!
La utilización inapropiada e insegura de esta herramienta el
H
itachi Koki

Hitachi C10RA3 - 10 Inch Portable Table Saw Specifications

General

Motor Power	15 Amps
Table Size	22 x 19-5/8 in
Weight	65 lbs
Bevel Capacity	0-45 Degrees
Voltage	120V
No Load Speed	5, 000 RPM
Stand Included	No
Blade Diameter	10 inches
Max Cutting Depth at 90 Degrees	3-1/8 inches
Max Cutting Depth at 45 Degrees	2-1/4 inches
Arbor Size	5/8 inches

Summary

Instruction Manual and Safety Instructions

General Safety Warning

Provides essential safety information regarding the correct and safe use of the power tool.

Product Specifications

Electrical Safety Warning

Power Tool Safety

General Safety Practices

Emphasizes common sense, alertness, and understanding the tool for safe operation.

Operation Safety Guidelines

Details safe operating procedures including tool checks, posture, and personal protective equipment.

Table Saw Safety

Blade Guard and Splitter Usage

Mandates use of blade guard, splitter, and anti-kickback pawls for through-sawing.

Workpiece Handling and Guidance

Stresses firm grip, push sticks, using fence/miter gauge, and avoiding awkward positions.

Blade and Body Positioning

Advises keeping body out of blade path and avoiding reaching over the cutting tool.

Specific Prohibitions and Warnings

Prohibits rip fence for crosscutting, molding heads, and unsafe blade handling.

Electrical Requirements and Safety

Power Supply Requirements

Specifies using a separate circuit, 120V, 15 Amp rating, and time delay fuse/breaker.

Extension Cord Guidelines

Grounding Instructions

Explains the importance of grounding for shock prevention and proper plug usage.

Assembly and Adjustments

Assemble Table Saw to Stand

Installing and Removing the Blade

Procedure for safely installing and removing the saw blade.

Blade Guard Assembly

Installing the Blade Guard Assembly

Aligning the Splitter

Ensures proper alignment of the splitter with the saw blade for safe operation.

Adjusting Positive Stops

Setting the 90° Stop

Setting the 45° Stop

Miter Gauge and Rip Fence

Miter Gauge Adjustment and Operation

Rip Fence Adjustment and Operation

Details how to adjust, lock, and use the rip fence for straight cuts.

Scale Indicators and Locking Levers

Operation

Basic Saw Operations

On/Off Switch and Overload Protection

Explains the function of the safety key switch and the overload reset button.

Cutting Operations

Ripping Techniques and Safety

Provides instructions and safety warnings for ripping operations.

Push Stick Usage in Ripping

Emphasizes the importance of push sticks for safe ripping, especially for narrow stock.

Specific Cutting Operations

Bevel Ripping and Small Pieces

Crosscutting Techniques

Details the procedure and safety precautions for crosscutting.

Bevel Crosscutting Procedure

Advanced Cutting Techniques

Compound Miter Crosscutting

Dado Cuts

Dado Blade Installation and Safety

Covers installing the dado insert, blade, and safety precautions for dado cuts.

Maintenance

General Maintenance Procedures

Blade Raising and Tilting Mechanism Check

Troubleshooting Guide

Troubleshooting Common Issues

Lists common symptoms, possible causes, and corrective actions for saw problems.