15
This projector is equipped with NETWORK BRIDGE function.
When the projector connects to the computer by LAN communicaton, an external
device that is connected with this projector by RS-232C communication can be
controlled from the computer as a network terminal.
For details, see the 6. Network Bridge Function - Network Guide.
Connection
1.
Connect the computer's LAN port and the projector's LAN port with a LAN
cable.
2.
Connect the projector's CONTROL port and the RS-232C port of the
devices that you want to control with a RS-232C cable.
3.
Turn the computer on, and after the computer has started up turn the projector
on.
4.
Set the COMMUNICATION TYPE to
NETWORK BRIDGE
. (
&
OPTION menu -
SERVICE - COMMUNICATION in the User's Manual - Operating Guide)
Network Bridge Communication
Network Bridge Communication
To Next Page
Loading...
