Hitachi CP-BX301WN User Manual

1
Projector
CP-BX301WN/CP-BW301WN
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” rst. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.

NOTICE This entry notices of fear of causing trouble.

Hitachi CP-BX301WN Specifications

General

Number of colors	16.78 million colors
White light output	3200 ANSI lumens
Native aspect ratio	4:3
Projection distance	- m
Projection technology	3LCD
Supported aspect ratios	16:10, 16:9
Contrast ratio (typical)	10000:1
Screen size compatibility	60 - 150 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-5 - 5 °
Vertical synchronization (max)	120 kHz
Horizontal synchronization (max)	106 kHz
Horizontal synchronization (min)	15 kHz
Fixed focal length	5.65 mm
Focal length range	- mm
Lamp power	225 W
Light source type	Lamp
Service life of light source	4000 h
Service life of light source (economic mode)	10000 h
RMS rated power	16 W
3D	-
Full HD	No
Supported video modes	480i, 480p, 576i, 720p, 1080i, 1080p
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Noise level	- dB
Certification	UL 60950-1 / cUL FCC Part 15 subpart B Class B
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates	10, 100 Mbit/s
Power source	AC
AC input voltage	198 - 264 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	340 W
Operating temperature (T-T)	0 - 40 °C
Placement	Desktop
Product type	Short throw projector
Product color	White
Market positioning	Short throw

Weight and Dimensions

Depth	302.2 mm
Width	345.4 mm
Height	86.3 mm
Weight	3810 g

Summary

Setting Up the Projector

Arrangement and Placement Guidelines

Guidelines for projector placement, projection distance, and screen type.

Connecting External Devices

Device Connection Procedures

Power and Security Setup

Connecting to Power Supply

Powering On the Projector

Initial Power-On Procedure

Steps to turn on the projector and initial setup menu.

PICTURE Menu Settings

Brightness, Contrast, and Gamma Control

INPUT Menu Settings

Progressive Scan, Noise Reduction, and Color Space

INPUT Menu Resolution Settings

Resolution Configuration

Setting the display resolution for computer inputs.

SETUP Menu Adjustments

Zoom and Picture Position Settings

SETUP Menu Eco and Lamp Settings

SETUP Menu Lamp and Filter Timers

Lamp and Filter Time Reset

SETUP Menu Standby Mode

Standby Mode Configuration

AUDIO Menu Settings

Volume, Speaker, and Audio Source Control

OPTION Menu Signal and Power Settings

Automatic Signal Search and Direct Power On

Enabling auto signal search and direct power on features.

OPTION Menu Auto Power Off

Auto Power Off Timer

OPTION Menu Service Settings

Altitude and Auto Adjust Settings

Adjusting fan speed based on altitude and auto-adjust performance.

OPTION Menu Communication Timing and Cloning

Projector Data Cloning

Saving and loading projector settings via USB memory.

OPTION Menu Data Loading and Factory Reset

SECURITY Menu Overview

Password Change and Recovery

Changing security password and procedure for forgotten passwords.

SECURITY Menu MyScreen Password

Setting and Disabling MyScreen Password

SECURITY Menu PIN Lock

Enabling and Recovering PIN Lock

Activating PIN code requirement and recovering forgotten PINs.

USB Display for Windows Computers

Starting Windows USB Display

Initial setup for connecting a Windows PC for screen mirroring.

USB Display for Mac Computers

Starting Mac USB Display

Initial setup for connecting a Mac PC for screen mirroring.

Maintenance Procedures

Replacing the Projector Lamp

Step-by-step guide for safely replacing the projector lamp.

Air Filter Maintenance

Cleaning and Replacing Air Filter

Instructions for cleaning or replacing the projector's air filter.

Troubleshooting Common Issues

Handling System Messages

Explains common messages and provides solutions for them.

Troubleshooting Indicator Lamps

Interpreting Power and Lamp Indicators

Explains the meaning of POWER, LAMP, and TEMP indicator states.

Troubleshooting Reset and Common Defects

Factory Reset Procedure

Restoring all projector settings to factory defaults.

Phenomena Mistaken for Defects

Troubleshooting Picture Quality Issues

Video Freezing and Color Tone Problems

Resolving issues like frozen video or poor color appearance.

Troubleshooting Connectivity and Schedule Issues

Unstable Signal and Computer Connection Issues

Resolving unstable signals and computer connection problems.

Troubleshooting Network and Cloning Issues

Cloning Data Save/Load Problems