Hitachi CP-X201 User Manual

1
Projector
CP-X201/CP-X301/CP-X401/CP-X450
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “Safety Guide” rst. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
• Mac is registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the properties of their respective owners.
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.


Hitachi CP-X201 Specifications

General

Lamp Life	2000 hours (normal mode), 3000 hours (eco mode)
Projection Size	30 - 300 inches
Speakers	1W mono
Resolution	1024x768 (XGA)
Aspect Ratio	4:3
Input Ports	VGA, S-Video, Composite Video, Audio
Output Ports	VGA, Audio
Power Consumption	260W (Normal mode)
Zoom Ratio	1.2x
Keystone Correction	±30° vertical
Video Compatibility	NTSC, PAL, SECAM

Summary

About This Manual and Safety

Symbol Explanations

Describes WARNING, CAUTION, and NOTE symbols used in the manual for safety guidance.

Projector Setup and Preparation

Projector Features Overview

Highlights the projector's key capabilities and advantages for users.

Initial Setup and Connection

Projector Arrangement and Placement

Guidance on projector placement, screen size, and projection distance.

Connecting Devices and Power

Instructions for connecting external sources, audio, and power.

Powering the Projector On and Off

Turning On the Power

Procedure for starting the projector and its lamp.

Turning Off the Power

Procedure for safely shutting down the projector and cooling the lamp.

Operating the Projector

Volume and Mute Control

Adjusting audio levels and temporarily silencing the sound output.

Input Signal Selection

Methods for switching between different video input sources.

Image Adjustments

Controlling zoom, focus, and projector elevation for optimal viewing.

Screen Manipulation Features

Using keystone correction, magnification, freezing, and blanking.

Picture Menu Settings

Brightness, Contrast, and Gamma

Adjusting core image light levels and tone reproduction.

Color Temperature and Tint

Sharpness and Memory Settings

Image Menu Settings

Aspect Ratio and Over Scan

Position and Phase Adjustment

Automatic Image Adjustment

Input Menu Settings

Signal Type and Format

Frame Lock and Input Configuration

Resolution Settings

Setup Menu Settings

Keystone Correction

Performing auto and manual keystone distortion adjustments.

Option Menu Settings

Automatic Functions

Configuring auto search, auto keystone, and auto power on/off.

Time Settings and Button Customization

Service and Information Access

Security Features

Password Management

Setting, changing, and recovering access passwords.

MyScreen and Text Security

PIN Lock Function

Transition Detector Function

Maintenance and Care

Replacing the Projector Lamp

Procedure and safety precautions for lamp replacement.

Air Filter Maintenance

Instructions for cleaning and replacing the projector's air filter.

Troubleshooting Common Issues

Error Messages and Indicator Lamps

Interpreting error messages and projector indicator lamp status.

Diagnosing Non-Defect Issues

Identifying and resolving common phenomena mistaken for machine defects.

Technical Specifications

Product and Panel Details

Ports and Connectivity