M
Miguel PetersonSep 9, 2025
What to do if an improper signal is input on Hitachi Projector?
- AAmy HerreraSep 9, 2025
Please confirm the specs for your Hitachi Projector or the signal source specs.
To Next PageTo Next PageWhat to do if an improper signal is input on Hitachi Projector?
Please confirm the specs for your Hitachi Projector or the signal source specs.
How to adjust brightness on Hitachi CP-X2514WN?
Adjust the brightness to a higher level using the menu function of your Hitachi Projector.
How to troubleshoot 'no input signal' on a Hitachi CP-X2514WN?
If your Hitachi Projector shows 'no input signal,' verify that the signal input connection is secure and check the status of the signal source.
What to do if the electrical power cord is not plugged in Hitachi CP-X2514WN?
Make sure to correctly connect the power cord to your Hitachi Projector.
What to do if input changeover settings are mismatched on Hitachi Projector?
Select the correct input signal on your Hitachi Projector and adjust the settings accordingly.
How to fix low volume on Hitachi CP-X2514WN Projector?
Increase the volume using the menu function or the remote control of your Hitachi Projector.
How to resolve the same network address set for both wireless and wired LAN on Hitachi CP-X2514WN?
Change the network address setting for wireless or wired LAN on your Hitachi Projector.
How to turn on NETWORK BRIDGE function on Hitachi CP-X2514WN?
Select NETWORK BRIDGE for COMMUNICATION TYPE item in the OPTION - SERVICE - COMMUNICATION menu of your Hitachi Projector.
What to do if horizontal or vertical frequency of the input signal is not within the specified range for Hitachi Projector?
Please confirm the specs for your Hitachi Projector or the signal source specs.
How to disable the SAVING function on a Hitachi Projector?
Select NORMAL for STANDBY MODE item in the SETUP menu of your Hitachi Projector.
General| Resolution | XGA (1024 x 768) |
|---|---|
| Contrast Ratio | 2000:1 |
| Throw Ratio | 1.5 - 1.8:1 |
| Zoom Ratio | 1.2x |
| Display Technology | LCD |
| Aspect Ratio | 4:3 |
| Projection Size | 30 - 300 inches |
| Lamp Life | 5000 hours (Eco mode) |
| Input Ports | HDMI, VGA, Composite |
| Outputs | Audio Out |
| Noise Level | 37dB (Normal Mode), 29dB (Eco Mode) |
Covers essential warnings, cautions, and notices for safe projector operation and handling.
Details critical safety information regarding the projector lamp, its handling, and other internal components.
Guides on projector arrangement, device connectivity, power connection, and part identification.
Explains how to adjust volume, mute, select input signals, and navigate basic menus.
Covers adjusting picture settings like zoom, focus, keystone, aspect ratio, and color parameters.
Details controls for aspect ratio, picture modes, brightness, contrast, color, and image positioning.
Guides users through input selection, setup options, audio controls, and screen display settings.
Covers signal search, power management, USB functions, network setup, and wireless configuration.
Explains PC-LESS Presentation and USB Display functionality for media playback.
Covers Network Presentation, Web Control, Messenger, and Network Bridge functionalities.
Provides instructions for replacing the projector lamp and cleaning/replacing the air filter.
Offers guidance on resolving common problems like connectivity, display errors, and audio issues.
Lists the projector's technical specifications, supported resolutions, and system requirements.
Provides warranty details, troubleshooting resources, and contact information for after-sales service.
