To Next PageTo Next Page
Need help?Do you have a question about the Hitachi CP-X2511N and is the answer not in the manual?
Provides guidance on projector placement, including screen size and projection distance tables.
Details safety precautions and environmental considerations for projector placement.
Explains how to connect external devices and provides general connection precautions.
Illustrates connections between the projector, input devices, and a computer.
Provides notes on computer connection, resolution compatibility, and auto adjustment.
Details connecting USB storage devices and microphones, including audio settings.
Explains how to connect the projector to a network using LAN and control ports.
Guides users on how to connect the projector to a power source safely.
Step-by-step guide on how to turn the projector on, including indicator lights.
Step-by-step guide on how to properly turn off the projector, including cooling.
Explains how to select input signals using dedicated remote control buttons.
Explains how to use the AUTO button for automatic image adjustment.
Introduces the menu system, including EASY and ADVANCED MENU operations.
Provides details on closing menus, moving positions, and resetting operations.
Details how to switch between different input sources using the INPUT button.
Details how to correct keystone distortion using automatic or manual modes.
Executes the automatic keystone correction function.
Performs automatic adjustment of vertical, horizontal position, and phase.
Sets the display resolution for COMPUTER IN1 and IN2 input signals.
Performs automatic keystone distortion correction.
Corrects vertical keystone distortion manually.
Accesses service menus for fan speed, auto adjust, ghost, and filter message.
Accesses service menus for key lock, remote frequency settings.
Configures communication type, serial settings, and transmission method.
Sets the response limit time for network bridge and half-duplex communication.
Displays input information and performs factory reset of projector settings.
Turns automatic keystone correction on or off.
Provides an overview of communication settings for the control port.
Configures network settings such as DHCP, IP address, and DNS server.
Configures network parameters like subnet mask, gateway, time difference, and date/time.
Allows changing the security password for accessing menus.
Sets a password to protect the MyScreen function and registered image.
Prevents unauthorized use of the projector without a PIN code.
Detects projector movement and triggers an alarm or prevents display.
Enables presentations directly from USB storage media without a PC.
Displays stored images as thumbnails for selection and navigation.
Displays selected images in full screen mode for presentations.
Displays images in slideshow mode with interval settings.
Details how to configure slideshow settings like start, stop, interval, and play mode.
Provides step-by-step instructions for replacing the projector lamp.
Details warnings about lamp handling, breakage, and proper disposal methods.
Guides on cleaning and replacing the projector's air filter.
Provides warnings and notes related to air filter maintenance and replacement.
Explains the meaning of different indicator lamp states and associated issues.
Continues the explanation of indicator lamps and their troubleshooting steps.
Lists common issues that might appear to be defects but have simple non-defect causes.
Continues listing common issues and their non-defect solutions.
Continues listing common issues and their non-defect solutions.
Lists network and display issues that may be mistaken for machine defects.
General
